©
2019 WEINZIERL ENGINEERING GmbH
Page 23/41
Behavior on ON telegram (when Brightness >0%)
If the current brightness is greater than 0%, this parameter can
be used to configure the behavior for a new ON telegram via ob-
ject 18 or 98.
It is available:
-
No reaction
-
Dim to fix value
-
Dim to fix value if higher than actual
Brightness on ON telegram
This brightness is activated by ON telegram via object 18 or 98
with suitable parameterization.
Fade time on ON telegram
This fade time is active when an ON telegram is received. The
period is related to a complete dimming process of 0-100%.
Behavior on OFF telegram
This parameter describes the behavior of the dimmer when an
OFF telegram is sent via object 18 or 98.
It is available:
-
No reaction
-
Dim to fix value
Brightness on OFF telegram
This brightness is activated by OFF telegram via object 18 or 98
with suitable parameterization.
Behavior on 2. OFF telegram
This parameter describes the behavior of the dimmer when a 2.
OFF telegram is received via object 18 or 98.
It is available:
-
No reaction
-
Switch off
The 2. OFF telegram must follow the 1. OFF telegram within 1
second in order to be evaluated. If the current brightness is
equal to or lower than the parameterized brightness for OFF tele-
gram, the device is already switched off by the 1. OFF telegram.
Fade time on OFF telegram
This fade time is active when an OFF telegram is received. The
period refers to a complete dimming process of 0-100%.
Day/night switching
When using this function, the following objects are visible for
switching between day/night mode:
Group Object TW A
Type KNX
Size
Direction
GO 21 TW A: Day/Night - Switch
1.001
1 Bit
From KNX
Group Object TW B
Type KNX
Size
Direction
GO 101 TW A: Day/Night - Switch
1.001
1 Bit
From KNX
Day mode is triggered with an ON telegram on the respective ob-
ject, night mode with an OFF telegram. After a restart, the device
is in day mode.
Telegrams on object 21 or 101 affect all activated
day/night switches of the TW channel.
In addition, it can be determined when the values become active
after receiving a telegram on these objects, it is available:
-
Disabled
-
Switch on day/night telegram
Immediately after reception of day/night switching, it is
dimmed to the active value according to the last
switch-on/switch-off received via object 18 or 98.
-
Switch on next on/off telegram
The currently active value is not used until the next
switch on/off telegram via object 18 or 98.
There is a separate switch-on and switch-off value for night
mode in the parameters, in day mode the always visible values
are used.
Brightness on ON telegram (night)
If the dimmer is in night mode, this value is activated by ON tele-
gram via object 18 or 98 and suitable parameterization.
Brightness on OFF telegram (night)
If the dimmer is in night mode, this value is activated by OFF tel-
egram via object 18 or 98 and suitable parameterization.
Fade time for day/night switching
This fade time is only active if switching on day/night telegram is
used. If switching on next on/off telegram is used, the regular
fade time of the respective on or off telegram is active. The pe-
riod refers to a complete dimming process of 0-100%.
Object change Brightness (rel.)
To change the brightness via relative dimming commands, the
following objects are available, if activated via parameters:
Group Object TW A
Type KNX
Size
Direction
GO 19 TW A: Brightness dimming rel. -
Brighter/Darker
3.007
1 Bit
From KNX
Group Object TW B
Type KNX
Size
Direction
GO 99 TW B: Brightness dimming rel. -
Brighter/Darker
3.007
1 Bit
From KNX
Minimal brightness while changing with object
This parameter can be used to set the minimum brightness that
can be achieved by relative dimming. If the current brightness is
below the minimum value, the brightness cannot be reduced via
object 19 or 99.
Maximal brightness while changing with object
This parameter can be used to set the maximum brightness that
can be achieved by relative dimming. If the current brightness is
above the maximum value, the brightness cannot be increased
via object 19 or 99.
Fade time while increasing brightness with object
This fade time is active when the brightness is increased by rela-
tive dimming with object 19 or 99. The period refers to a com-
plete dimming process of 0-100%.
