7 of 11
WX-501-0544 • 01.22
After you have made configuration changes on a driver and saved it to the Click device, the word “current” will
appear after that driver to indicate the driver that is currently loaded onto the device.
Note.
Changing any of the settings on any driver and saving them to the Click device will change those settings
on all drivers.
The Backups option can be used to read configurations that have previously been saved to file.
Expert
The Expert driver allows you to configure the Click 513. The driver is divided into two tabs,
System
and
513
.
The
System
tab is divided into three subtabs:
General
,
Comm
, and
Autobaud
.
The
General
subtab contains information about the device (see the figure and table below).
Setting
Description
Module
Shows the name of the Click device.
Driver
Names the driver you are currently working with.
Description
Shows a description of the device being configured. This is only for your information and does not
affect the operation of the device.
Location
Displays the location of the device being configured. This is only for your information and does not
affect the operation of the device.
Serial Number
Displays the serial number of your device.
