Wavecrest TidalForce M-750 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 43

Wavecrest TidalForce M-750 Скачать руководство пользователя страница 4

About this Manual

WaveCrest Laboratories

TidalForce M-750 High Performance Electric Bicycle Owner’s Manual

Copyright ©2004 WaveCrest Laboratories, LLC

4

About this Manual

CONGRATULATIONS ON SELECTING THE TIDALFORCE M-750. IN ORDER TO USE

AND ENJOY YOUR BICYCLE SAFELY AND TO GET THE BEST PERFORMANCE AND
DURABLILITY FROM THIS PRODUCT, PLEASE READ THIS MANUAL THOROUGHLY

BEFORE RIDING.
The information contained in this manual is to be used as guidelines for safe operation and

are not intended to replace any safety rules or laws that may be in force in your area. If
you have any questions regarding your M-750, or if you do not understand something in

this manual, please contact your local TidalForce dealer or the WaveCrest Customer Support
Team at 888-880-1988.

Important Symbols and Terms
Even on the best days, riding or operating any sort of vehicle is hazardous. Serious injury
or death can occur as a result. Thus, this manual uses the following symbols and terms to

call your attention to warnings, cautions, and notes:

Symbol Term

Meaning

WARNING:

This symbol and term denotes a warning. A warning indicates a
potentially hazardous situation which, if not avoided, could result in

bodily injury or death. Read the text accompanying the warning to
be aware of the specific hazard and avoid bodily injury or death.

CAUTION:

This symbol and term denotes a caution. A caution indicates a

potentially hazardous situation which, if not avoided, could result in
damage to equipment or inadvertent system failure. Read the text

accompanying the caution to be aware of the specific hazard and
avoid equipment damage or system failure.

Note:

This symbol and term denotes a note. The text accompanying a
note provides helpful or other important related information.

Please read and follow all warning and caution notices marked on your M-750 and included
in this manual.

Related Manuals
Many of the components comprising the M-750 have manuals that provide additional
information. These manuals were supplied with your new M-750. Refer to “Initial

Inspection” on page 5 for a listing of the manuals.

Clarification
References to the left and right sides of the M-750 are relative to the riding position on the
bicycle.

«
...
2
3
4
5
6
...
»

Содержание TidalForce M-750












































Отзывы:

Нет отзывов