7
Visit our website at http://watt-age.globalhobby.com for information on other Wattage products
Wattage stocks a complete line of replacement parts for your Tubby Cubby EP. Listed below are the replacement parts
that are available along with their respective part numbers for easy ordering convenience. We suggest ordering directly
from your local dealer. If your dealer does not stock Wattage products, you can order directly from us at the address
shown below:
SECTION 5: REPLACEMENT PARTS
Global Hobby Distributors
18480 Bandilier Circle
Fountain Valley CA 92728
Phone: (714) 963-0329 Fax: (714) 964-6236
❑
Kwik Bond 5 Minute Epoxy
❑
Excel Modeling Knife
❑
1/8" Drill Bit
❑
Paper Towels
YOU'LL NEED THE FOLLOWING PARTS:
❑
(1) Fuselage
❑
(1) Fuselage Reinforcement Board - 2 Parts
❑
(1) 100mm Wooden Dowel
SECTION 6: FUSELAGE ASSEMBLY
❑
(1) 70mm Wooden Dowel
❑
(1) 12mm Square Plywood Plate
YOU'LL NEED THE FOLLOWING SUPPLIES:
❑
Rubbing Alcohol
❑
NHP Epoxy Mixing Sticks
❑
NHP Epoxy Mixing Cups
Step 1: Applying the Fuselage Reinforcement Board
❑
Using the tip of your modeling knife, carefully remove
the die-cut circles out of the ends of both pieces of fuselage
reinforcement board.
Instruction Manual
-
145368
Wing Set
-
145369
Fuselage Set
-
145370
Stabilizer Set
-
145371
Cowling
-
145372
Decal Sheet
-
145373
Landing Gear Set
-
145336
Pushrod & Clevis/Horn Set
-
145335
Motor, Gearbox & Propeller
-
145346
370 Size Motor
-
131350
7.5 x 5 Propeller
-
131381
Gear Box Assembly - No Motor
-
131371
Gears Only for Gear Box
-
131376
