6
Need help or have any questions? Call us at 1-714-963-0329 or send us an email to [email protected]
❑
Kwik Bond 5 Minute Epoxy # 887560
❑
# 0 Phillips Head Screwdriver
❑
# 1 Phillips Head Screwdriver
❑
Magnum Z-Bend Pliers # 237473
❑
Wire Cutters
❑
Needle Nose Pliers
❑
Adjustable Wrench
❑
Excel Modeling Knife # 692801
❑
Scissors
❑
Electric Drill
❑
Assorted Drill Bits
❑
Ruler
❑
Pencil
❑
Masking Tape
❑
Builder's Triangle
❑
220 Grit Sandpaper w/Sanding Block
❑
Paper Towels
❑
Rubbing Alcohol
❑
NHP Epoxy Mixing Sticks # 864204
❑
NHP Epoxy Mixing Cups # 864205
❑
K&S 30 Watt Soldering Iron # 598120
❑
Solder
SECTION 3: TOOLS AND SUPPLIES REQUIRED
To convert inches into millimeters: Inches x 25.4 = mm
1/64"
=
.4mm
1/32"
=
.8mm
1/16"
=
1.6mm
3/32"
=
2.4mm
1/8"
=
3.2mm
5/32"
=
4.0mm
3/16"
=
4.8mm
1/4"
=
6.4mm
3/8"
=
9.5mm
1/2"
= 12.7mm
5/8"
= 15.9mm
3/4"
= 19.0mm
1"
= 25.4mm
2"
= 50.8mm
3"
= 76.2mm
6"
= 152.4mm
12"
= 304.8mm
18"
= 457.2mm
21"
= 533.4mm
24"
= 609.6mm
30"
= 762.0mm
36"
= 914.4mm
SECTION 4: METRIC CONVERSION CHART
IMPORTANT
The soldering iron and solder listed above are optional. Depending on the ESC and flight battery you have chosen to use,
they may not have plugs that are compatible with the plug that comes preinstalled on the motor. If this is the case you will
need to solder a compatible plug onto the motor or, better yet, solder the ESC leads directly to the motor.
WARNING
The Tubby Cubby EP is constructed of EPS and Closed Cell Foam. It is very important that you use no solvents,
Cyanoacrylate (C/A) glue, or paint that can damage foam. If any of these chemicals comes in contact with the
foam parts, the parts will be destroyed and will not be covered under warranty. Use only epoxy where glue is
required. If you decide to add painted details to the airplane, use acrylic-based paints and always test the paint
on a scrap piece first.
WARNING
We do not suggest storing your airplane in an extremely hot environment (like the back of your car in direct
sunlight) for any length of time. The extreme heat could cause the foam to melt and possibly damage the fragile
components of the radio system, ESC or batteries.
