7
warmhaus.com.tr
1.2. RECOMMENDATIONS ON USING THE
BOILER ECONOMICALLY
Your boiler is adjusted for economic usage in the factory,
we recommend not to change it.
Correct Capacity Selection
Boiler capacity must be selected accordingly by properly
calculating the heat loss of the place where the boiler will be
used. Appliance without the adequate capacity will response
late to the heating demands, appliances with over capacity may
cause discomfort and more fuel consumption as it will activate
more frequently. Thus, it is necessary to select boiler capacities
according to the place of use.
Isolation
Isolation condition of your building is the most important issue
preventing the heat loss and decreasing the gas consumption.
Furthermore, as it has the thickest isolation of its class, heat loss
is minimized.
Radiators
Make sure to balance pressure distribution of your heating
system in the house by arranging the reduction settings of your
radiator valves. Putting furniture in front of radiators cause
discomfort and more fuel consumption as it prevents the air
circulation. Turning down the radiator valves of rooms which
haven’t been used for a long time or reducing to the lowest if
thermostatic radiator valve is being used and closing the room
doors provide savings.
Domestic Hot Water
If you are using the boiler with a DHW boiler, we recommend
you to adjust temperature of domestic hot water as (38~42 °C).
Setting the temperature adjustor to a low level provides savings
at a large rate.
Thermostatic Radiator Valves
You can acquire both saving and comfort by balancing the
heat distribution in the places of home via using Thermostatic
Radiator Valves.
Room Thermostats
As you will have the opportunity to adjust ambient temperature
with room thermostats according to comfort and economy
timers, your boiler will operate more economically. Thus, both
you can adjust your room temperature as you wish and you can
save on energy to about %6 with each degree of temperature
decrease.
Ventilation
Don’t leave windows half open to ventilate the room/rooms.
In that case, although there will be no significant improvement
in the room air, there will be constant heat loss. Opening the
windows fully for a short period of time results better. While
ventilating the rooms, reduce the thermostatic radiator valves to
the lowest.
1.3. POINTS WHICH USERS MUST PAY
ATTENTION FOR TERMS OF WARRANTY
This warranty given by WARMHAUS doesn’t involve repairing
faults arising from using the product other than normal, also the
following is out of warranty:
1. Damages and faults in the products which wasn’t started up
by Warmhaus Authorized Services,
2. Damages and faults arising from using the product
inconsistently with Operating Manual and out of purpose,
3. Damages and faults arising from wrong type selection,
4. Damages and faults due to maintenance and repairs by
people other than Authorized Services,
5. Damages and faults arising from transportation, discharge,
loading, storing, external physical (crashing, scratching,
breaking) and chemical factors after the delivery of the
product,
6. Damages and faults occurring due to fire, flood or stroke of
lightning,
7. Damages and faults arising from wrong fuel usage and fuel
features,
8. Damages and faults occurring due to under or high voltage;
not using grounding plug; wrong electric wiring,
9. Damages and faults arising from not carrying out the
described periodical maintenance on time,
10. Damages and faults which may occur in the appliance or
usage area due to other product and accessories used in a
system with the guaranteed appliance.
11. Faults and damages due to freeze/icing or using in places
open to atmosphere (outside balloon etc.).
12. Distorting the Registry Label and Certificate of Warranty,
13. Damages and faults arising from using water other than the
water values stated in the operating manual of the appliance,
Repair of the above-mentioned faults and in the warranty period
of the device, annual maintenance and cleanings made by our
authorized services will be done at a fee.
