WAREMA Wisotronic, Руководство по установке

Страница: 17 / 108

warema_890558_alhb_en_v5•2022-02-01 We reserve the right to carry out improvements
17
4 Installation
CAUTION
Dangerous situations and malfunctions are possible.
The control and its auxiliary components may only be operated when
installed and at the specified installation locations. Malfunctions of the
system or dangerous situations may occur if this is neglected. In every
case, this will render any guarantee or warranty null and void.
4.1 Scope of delivery
The Wisotronic package contains the following parts:
Control panel
Base plate with supply unit
Flush-mounting box incl. 4 countersunk screws
Wisotronic installation instructions (this document)
Wisotronic operating instructions (art. no. 890557)
Wiring diagrams (art. no. 816345)
4.2 Options
4.2.1 Weather station
multisense
To operate the many different automatic controls, weather information
needs to be collected. Suitable sensors are necessary. The weather station
multisense was specifically developed for use with the Wisotronic – all
important information is collected with a single device.
If you purchased the Wisotronic without a weather station, it can be retrofitted
with a weather station multisense.
4.2.2 Further options
The Wisotronic can receive EWFS radio signals. With the optionally available
WAREMA EWFS transmitters, you can remote control sun shading products
connected to the Wisotronic.
EWFS Hand-held transmitter 1-channel or EWFS Hand-held transmitter
8-channel
EWFS Wall-mounted transmitter 1-channel or EWFS Wall-mounted transmitter
8-channel
Installation