WAREMA Wisotronic, Руководство по установке

Страница: 63 / 108

warema_890558_alhb_en_v5•2022-02-01 We reserve the right to carry out improvements
63
Limit value ICE
You can specify exactly from which temperature the ice alarm shall be trig-
gered. In the event of precipitation and when the temperature drops below
the set limit value, the sun shading product is moved to the set position
and remains there until the ice alarm is cancelled. The setting range is 0 to
+10°C.
Information on how to move the sun shading product despite the alarm is
provided under "Manual reset of ice alarm" below.
Change the "Limit value ICE" as follows:
Scroll to [
Limit value ICE
] by turning the touch wheel; press the
touch wheel.
Change the limit temperature by turning the touch wheel (the [
Standard
] but-
ton sets the value to the default value of +3 °C).
Accept the value by pressing the touch wheel.
Position ICE Slat angle ICE
Depending on which type of product is being controlled, the [
Position ICE
]
and [
Slat angle ICE
] values can also be set, where 0% corresponds to the
top position of the sun shading product.
Reset ice alarm
automatically?
The control can automatically reset an ice alarm. If the outside temperature
rises by 2 °C above the [
Limit value ICE
] you have set, the ice alarm is
reset automatically and operation is enabled again.
Reset ice alarm manually
You can also reset the ice alarm manually. This is required if you deactivated
the automatic resetting of the ice alarm.
Meas. value outside temp.
Meas. value precipitation
These two lines display the current outside temperature and the precipitation
and cannot be adjusted.
Press the [
Back
] button to return to the [
Safety functions
] menu.
Channels