WAREMA Wisotronic, Руководство по установке

Страница: 82 / 108

warema_890558_alhb_en_v5•2022-02-01 We reserve the right to carry out improvements
82
Wisotronic 1-channel
Installation instructions
Faults
9.5 Faults
Press the [
Measured values
] function button in the main menu and, in the
[
Measured values and histories
] menu, select the [
Faults
] menu item by
turning and pressing the touch wheel. You are now located in the [
Faults
]
menu:
Example You will see a numbered list of faults in chronologically ascending order.
Each line contains:
Fault number
Fault type
Affected device
Date and time
Turning the touch wheel navigates up and down in the list.
When an entry is marked with the [
Read
] function button, it changes its col-
our (see figure, fault number 2).
The [
Delete
] function button is used to delete an entry.
If a fault sensor contact is connected and set up, the condition “Fault” is set
when a fault occurs. The fault message is reset with the [
SK off
] function
button.
Start menu
 Measured values

Faults