WAREMA Wisotronic, Руководство по установке

Страница: 44 / 108

warema_890558_alhb_en_v5•2022-02-01 We reserve the right to carry out improvements
44
Wisotronic 1-channel
Installation instructions
System settings
8.1.2 Display settings
Select [Brightness at standby] by pressing the touch wheel; turning the wheel
changes the value between 10% and 100%. If you select a setting below
10% (OFF is displayed), the display will go completely dark later on when
standby is active. You can return to the default value at any time by using the
[
Stand.
] button.
Set the [Brightness at operation] in the same manner in the next menu line.
Button tone: The button tone of the four sensor buttons (a soft click) can be
activated and deactivated here.
Duration of standby mode: The time can be set in the range of 1 to 240 min.
With [
Colour scheme
], you can change the colours of the display. Two col-
our schemes are available: "dark" and "light".
Press the [
Back
] button to return to the [System] menu.
Main menu
 Settings
 Service

Project setup
 System
 Display