WAREMA Wisotronic, Руководство по установке

Страница: 15 / 108

warema_890558_alhb_en_v5•2022-02-01 We reserve the right to carry out improvements
15
3.3.1 Channels, facades and
products
Because misunderstandings have already occurred regarding the term
"Facade" in the area of sun shading control systems, this point shall be ex-
plained here in more detail:
The Wisotronic has 1, 2, 3 or 4 channels, depending on the model. Each
channel can access either a single product (e.g. an awning) or several prod-
ucts of the same type (e.g. roller shutters).
To actuate multiple products through a single channel of the Wisotronic, ad-
ditional components may be required (such as motor control units).
➊ ➋ ➌
Fig. 4 Example: channels of the Wisotronic
Example In the example illustrated above, channel  controls the awning on facade 1,
channel
2
the conservatory awning on facade 2 and channel
3
the external
venetian blinds of the conservatory on facade 2. This demonstrates that a
distinction according to building facades cannot be made in this example
since the individual channels are of importance here.
Example Another example: The Wisotronic controls all roller shutters on the west fa-
cade with channel 1, all roller shutters on the south facade with channel 2
and all roller shutters on the east facade with channel 3. Because the control
is divided here according to the facades, the term "facade" instead of "chan-
nel" could be used in this example.
Introduction