WAREMA Wisotronic, Руководство по установке

Страница: 35 / 108

warema_890558_alhb_en_v5•2022-02-01 We reserve the right to carry out improvements
35
6.2 Typical approaches for
commissioning
The Wisotronic allows for different approaches to commissioning. Depending
on the complexity of the building project, commissioning may take place via:
The Quickstart on the control panel
It guides you to a finished project with the basic settings in just a few steps.
During the setup procedure, the most important parameters can be viewed
and changed. In a final step, they are transferred to the connected devices
(sensors and actuators).
Manual commissioning
For complex building projects with special requirements and settings, it may
be useful to perform a manual commissioning.
Proceed in this sequence:
Create channels, create product, load data into the devices, set the param-
eters for the comfort and safety functions.
You can also use the Quickstart to create the basic framework of your project
and then continue by manually adjusting the system to your preferences and
circumstances.
After the project data have been stored in Wisotronic, they are uploaded to
the actuators.
The system is now ready for operation.
Overview