Installation
WAREMA Renkhoff SE Hans-Wilhelm-Renkhoff-Straße 2 97828 Marktheidenfeld, Germany
www.warema.de
y
DANGER
Functional problems and product damage due
to incorrect operation in frosty conditions! The
external venetian blind can freeze when tem-
peratures drop below the specified tempera-
ture (+ 3 °C).
Do not operate the external venetian blind
if it is frozen.
Avoid applying force to the external ve-
netian blind if it is frozen. The external ve-
netian blind can become damaged.
In wintry temperatures, retract the product
to the upper limit position and change to
winter operation. If the external venetian
blind is controlled by a higher level control
without ice monitoring, the control can op-
tionally be set in such a way that the ex-
ternal venetian blind stays in the upper
limit position and can no longer be lowered
by the control or local operating elements.
We
recommend
the use of an ice monito-
ring system.
d
d
2
0
0
0
0
1
0
4
5
Fig. 7:
Attaching the label
Notify the operator that the label should be applied in
the area of the operating element.
Install and connect the battery-operated control
and other components according to the installati-
on instruction.
Connect the external venetian blind drive accord-
ing to the included setting instructions and wiring
diagram.
Train the operator in how to operate the external
venetian blind with auxiliary motor and battery-
operated emergency retraction set. This is only
possible after the battery-operated control has
been installed.
Hand over the installation instructions of the bat-
tery-operated control to the operator.
