Product information
[M2001452_0] - EN / 22.06.12
Page 6 of 20
Subject to change without notice
2
Product information
2.1
Parts description
d
d
2
0
0
0
0
5
2
4
0
1 Top rail
6
Bottom rail
2 External venetian blind
drive (motor)
7
Tilting tape
3 Auxiliary motor
8
Emergency push but-
ton*
4 Tension cable
9
Battery-operated con-
trol*
5 Slat
10
Lifting tape
Fig. 1:
Parts overview for the external venetian blind with
auxiliary motor and battery-operated emergency re-
traction set and cable guidance
* The emergency push button and the battery-
operated control together make up the emergency
retraction set
2.2
Technical data/accessories
Weight
Value
Flat slat
Approx. 2.7 kg/m²
Beaded slat
Approx. 3.1 kg/m²
Dim-out slat
Approx. 3.2 kg/m²
Tab. 1:
Weights for external venetian blind
Data for electric drive (external venetian blind drive)
Parameter
D339
Rated torque
9 Nm
Power
131 W
Current consumption
0.57 A
Rated speed
26 rpm
Rated voltage
230 V AC
Frequency
50 Hz
Degree of protection
IP 54
Short-term operation (S2)
4 minutes
Limit switch range
97 revolutions
Tab. 2:
Details on the external venetian blind drive
)
NOTE
The technical data on the control can be found in
the associated installation instructions.
Accessories
A wide range of control devices is available for the sun
shading system to give you optimum control of the pro-
duct. These controls can be combined with the
emergency retraction system.
However
, this must be
clarified on a case by case basis.
Do
not
use the external venetian blinds in icy or frosty
weather. Liability cannot be accepted for damage to the
sun shading system resulting from the operation under icy
conditions. We
recommend
using an ice monitoring sys-
tem.
