background image

Product information 

[M2001452_0] - EN / 22.06.12 

Page 7 of 20 

Subject to change without notice 

2.3

Intended use 

The external venetian blind with auxiliary motor and bat-
tery-operated emergency retraction set is an external sun 
shading system used at escape doors and emergency 
windows to protect against summer heat and glare and to 
provide privacy. 

In the projection area of the external 

venetian blind, there must be no obstacles/protruding 
parts (for example, door stop), especially on the door 
leaf, that would prevent raising of the external veneti-
an blind while also opening the escape door at the 
same time.

 If this cannot be prevented, other technical 

measures must ensure that the closure on the door leaf 
can be opened before the escape route is cleared by the 
external venetian blind with auxiliary motor and battery-
operated emergency retraction set. However, this must 
always be planned and approved by the architect/planner 
or the local building authority. 

Inappropriate use may 

result in significant danger. 

All external venetian blinds for external use are designed 
for a wind load of 1.1 kN/m² (DIN 1055). The directive 
entitled "Wind loads for construction of closures and aw-
nings when retracted – Section 5.1.1"

1

 defines the positi-

ons at which these products can be installed without 
requiring special precautions. 

To ensure that the external venetian blind with auxiliary 
motor and battery-operated emergency retraction set can 
be activated reliably, 

the external venetian blind must 

always be operated via the associated electronic bat-
tery-operated control.

 

Additional loads on the external venetian blind with auxili-
ary motor and battery-operated emergency retraction set, 
such as from suspended objects, could damage the pro-
duct or cause it to fall (for example, tearing of the lifting 
tapes), or cause the external venetian blind with auxiliary 
motor and battery-operated emergency retraction set to 
fail, and are therefore also not permitted. 

The intended use also includes observing these instruc-
tions and the installation conditions. 

 

1

  Published by the Bundesverband Rol Son-

nenschutz e.V. and Bundesverband Konfektion 
Technischer Textilien e.V. - BKTex 

 

)

NOTE 

Compliance with legal provisions and country-
specific regulations on site is the responsibility of 
the ordering party/building owner. There may be 
regional regulations and conditions that prohibit 
use of the external venetian blind with auxiliary 
motor and battery-operated emergency retraction 
set. However, each and every case cannot be 
investigated by WAREMA. 

 
 

)

NOTE 

Use of the battery-operated control for external 
venetian blinds with auxiliary motor and battery-
operated emergency retraction set is only permis-
sible in normal room climates. The intended use 
only applies in the specified temperature range (as 
per the technical data in the installation instruc-
tions). Use in damp locations (such as swimming 
pools) is 

not

 permissible. 

The heating from outside influences must be less 
than the intrinsic warmth. 

 
 

Содержание External venetian blind





















Отзывы: