WAM WAMFLO FOOD FN200X страница 55 Скачать руководство пользователя

Страница: 55 / 85

8.0 REPLACEMENT OF PARTS

WAMFLO

FN200X

FIL.WAMFLO_FN200.EX.M.A7.0522.EN Issue: A7

05.22

8.2 Replacing the filter elements

Replace the filter elements with a new one having the same structural and functional features.

Always use original spares to ensure the safety and proper operation of the equipment.

Danger - Warning

Set the filter in safety condition (see "Glossary and Terminology").

Do not dump the filter elements.

OPEN THE COVER

FILTERS WITH PLASTIC COVER

FILTERS WITH METAL COVER

Remove the

padlock.

8.1 Safety recommendations for replacement

Danger - Warning

The replacement operations must be carried out by a specialist authorized technician with specific

skills in the sector concerned (mechanical, electrical etc).

Before carrying out any operation, provide suitable safety measures and use the appropriate equip-

ment to prevent risk of work injuries to persons involved in the operations and those nearby.

Activate all the safety devices envisaged and prevent access to controls which, if activated, could

cause work injuries to the persons involved in the operations.

Содержание WAMFLO FOOD FN200X






















































































Результаты поиска

Содержание WAMFLO FOOD FN200X

Отзывы:

Похожие инструкции для WAMFLO FOOD FN200X

Бренды по названию

Популярные бренды

WAM WAMFLO FOOD FN200X, Сборка и основные инструкции по использованию и обслуживанию

Результаты поиска

Содержание WAMFLO FOOD FN200X

Отзывы:

Похожие инструкции для WAMFLO FOOD FN200X

Бренды по названию

Популярные бренды