1.0 GENERAL INFORMATION
WAMFLO
®
FN200X
2
FIL.WAMFLO_FN200.EX.M.A7.0522.EN Issue: A7
05.22
1
This Manual has been prepared by the Manufacturer to provide the operating technical information for instal-
lation, operation and maintenance of the equipment concerned.
The Manual, which is an integral part of the equipment concerned, must be preserved throughout the life of the
equipment in a known easily accessible place, available for consultation whenever required.
If the Manual is lost, damaged or becomes illegible, contact the Manufacturer for a copy specifying the serial
number of the equipment.
If the equipment concerned changes ownership, the Manual has to be handed over to the new owner as part
of the equipment supply.
The Manual is meant for specialist technical personnel appointed and authorized by the Manufacturer, owner
and installer to act on the equipment concerned for which specific technical skills in the sector concerned are
necessary (electrical, mechanical, etc.).
The illustrations may differ from the actual structure of the equipment concerned but do not interfere with the
explanation of the operations.
In case of doubt, contact the Manufacturer for explanations.
The Manufacturer reserves the right to make changes to the Manual without the obligation to provide prior
notification, except in case of modifications concerning the safety level.
The technical information included in this Instruction Manual is the property of the Manufacturer and therefore
has to be considered as confidential.
It is forbidden to use the Manual for purposes other than those strictly linked to the operation and maintenance
of the equipment concerned.
This information is provided by the Manufacturer in the original language (English) and can be translated into
other languages to satisfy legislative and/or commercial requirements.
1.1 Scope of the Manual
