1.0 GENERAL INFORMATION
WAMFLO
®
FN200X
2
FIL.WAMFLO_FN200.EX.M.A7.0522.EN Issue: A7
05.22
6
For all technical assistance, contact the Manufacturer’s service network.
For all requests, provide the equipment identification data, the type of problem encountered and all other infor
-
mation which could be useful for identifying the problem.
The conditions for validity and applicability of the warranty are specified in the sales contract.
The equipment is delivered according to the specifications indicated by the Buyer in the order and the condi
-
tions valid at the time of purchase.
The Manufacturer shall not accept responsibility for safety of persons or objects and operation failure of the
equipment if the loading/unloading operations from trucks, transport, positioning at the site, use, repairs, main-
tenance etc. have not been carried out in compliance with the warnings described in this Manual, and in ac-
cordance with the national legislation in force.
Likewise, the Manufacturer shall not accept any responsibility if the equipment concerned is used:
- improperly;
- by unauthorized persons and/or persons not sufficiently trained for installation, operation and maintenance;
- with modifications made to the original configuration without the Manufacturer’s permission;
- with spare parts that are not original or are not specific for the model;
- without maintenance;
- non-pursuant to the regulatory standards and national or local legislation on the matter of occupational
safety;
- non-pursuant to the recommendations in this Manual or on the warning and danger plates applied on the
equipment.
1.5 Request for assistance
1.6 Warranty
1.7 Exclusion of responsibility
