![background image](http://html2.mh-extra.com/html/waltco-lift/bz-33/bz-33_installation-manual_3269133042.webp)
Chapter 4 Liftgate Installation
PLATFORM RUBBER STOPS
If the vehicle is not equipped with at least side seals,
rubber stops for the platform must be installed on the
corner post of the body at a height of 2/3’s the height of
the closed liftgate platform on both corner posts
Install rubber stops as shown and adjust tilt cylinders so
that the platform firmly contacts the stops when fully
closed.
Space rubber stops out from corner post as may be
required. Spacers not provided.
GR01605
FLAT BED APPLICATIONS
On flat bed applications, vehicle must be equipped with
corner posts.
Make sure that the corners post are strong enough to
support forces from platform.
Install rubber stops as shown and adjust tilt cylinders so
that the platform firmly contacts the stops when fully
closed.
Space rubber stops out from corner post as may be
required. Spacers not provided.
GR01606
RUBBER STOP
PLATFORM
RUBBER STOP OR
PIECE OF SEALING
page 42
Содержание BZ-33
Страница 17: ...Chapter 4 Liftgate Installation Electric and Hydraulic Diagram G page 17...
Страница 18: ...Chapter 4 Liftgate Installation Electric and Hydraulic Diagram with Auto tilt G page 18...
Страница 61: ...Add silicone caulk to seal gaps between tracks and vehicle body page 61...
Страница 65: ...This page left intentionally blank page 65...