![background image](http://html2.mh-extra.com/html/waltco-lift/bz-33/bz-33_installation-manual_3269133037.webp)
Chapter 4 Liftgate Installation
WELDING, CUTTING AND GRINDING
Before doing any metal work:
Pull pump unit out from main frame and cover with
non flammable material.
Cover piston rods with non flammable material.
Welding, torching or grinding can damage
cylinders, hoses or electrical system.
GR00508
WELDING
Welding machines ground point must connected as
close to welding point as possible.
Do not allow ground current go through pivot pins,
bearings, cables or hydraulic hoses.
Welding current can melt cables or burst
hoses causing personal injury.
GR00508
PAINTING
IMPORTANT!
Do
not
paint the cylinder piston rods!
Any paint applied to piston rods will eventually effect the
operation of liftgate by contaminating the entire
hydraulic system, causing blockages in valves, pump,
filter, cylinders, and hoses.
GR00508
PULL PUMP
UNIT OUT
COVER
DO NOT
GROUND
WELDING
MACHINE TO
CYLINDERS
DO NOT ALLOW
ANY PAINT ON
PISTON RODS!
page 37
Содержание BZ-33
Страница 17: ...Chapter 4 Liftgate Installation Electric and Hydraulic Diagram G page 17...
Страница 18: ...Chapter 4 Liftgate Installation Electric and Hydraulic Diagram with Auto tilt G page 18...
Страница 61: ...Add silicone caulk to seal gaps between tracks and vehicle body page 61...
Страница 65: ...This page left intentionally blank page 65...