- 20 -
Separate tank connection
Installation instructions for separate tank connection
If the fuel will be taken from a separate Wallas day tank, you must install a tank connection 367215 (4 m) or 367216 (6
m).
Tighten the barrel nut tightly to the fuel pump connector at the device end of the fuel system. Keep the parts and
the hose clean and ensure that the connection is tight, because an air leak in the connector will stop the device
from functioning.
Install the tank connection in the tank.
The joint has to be very tight to prevent air leaks. Tightening torque is 19Nm.
Wallas fuel tanks
Volume
Length x height x width
WALLAS code
5 l
200 x 300 x 130 mm
2024
(accessory)
10 l
380 x 195 x 210 mm
2027
(accessory)
33 l
500 x 230 x 350 mm
4030
(accessory)
130 l
800 x 400 x 600 mm
4130
(accessory)
Содержание Spartan
