background image

                       

 

COZY LEGS Instructions  Part # CL-R 

 

MOUNTING: Cozy Legs can be mounted in two ways, depending on what is most 

convenient.   

 

Free-Standing: 

 If you will be using Cozy Legs free-standing in any area, simply turn the 

movable base of the stands perpendicular to the U-shaped bracket holding the panel.  Then, 

move each stand a bit further apart from the other for better stability.  If you wish to 

tighten the screw, use a Phillips-head screwdriver.     

 

 

Flush-mounted:

  If you will be mounting Cozy Legs to a wall or to the modesty panel of your 

desk, then use the included interlocking style adhesive strips as follows:  Simply remove and 

discard the two stands (by gently pulling them off of the Cozy Legs panel (the panel has 

been pre-inserted into the two stands for easy shipping).  Using the alcohol wipes, clean surfaces of both Cozy Legs and desk panel 

where adhesive locking pads will be affixed.  (Note: all locking loops are the same — not male/female)  Remove adhesive backing from 

two pads and stick them on the Cozy Legs (½” from the top edge of Cozy Legs with the long side of the pads parallel with the top edge.)   

Without removing the adhesive backing from the two pads that will mount to the desk panel, press them to the two pads already 

mounted on the Cozy Legs.  Remove the adhesive backing and firmly secure assembly to desk panel.   

 

 

 

CAUTION:  Mount vertically. Do not use directly on floor or in horizontal position.   

 

CLEANING:  Unplug unit and wipe with a damp cloth.

  

 

 

OPTIONAL ACCESSORIES FOR COZY LEGS 

 

 

HI-LO SWITCH AND POWER CONNECTION  Plug Cozy Legs into the HI-LO  

switch “piggy-back” plug and then plug the assembly into a 120 VAC  

outlet.  The HI position yields 150 watts output.  The LO position yields  

75 watts output.  The center position turns the product OFF.  Peel the  

backing from the adhesive pad on the back of the HI-LO switch and  

mount it in a convenient location.  Part #HI-LO. 

 

IMPORTANT:  READ BEFORE USE 

This appliance has a polarized plug. To reduce risk of electric shock, this plug is intended to fit in a polarized outlet one way. If the plug 

does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. 

 

WARRANTY (ALL MODELS): This product is warrantied against defects in materials and workmanship for a period of six months from the shipping date.  At the option of 

Cozy Products, we will either replace or repair the defective unit. 

 

WARNING (ALL MODELS): Take care to determine prior to use whether this device is suitable, adequate or safe for the use intended.  Since individual applications are 

subject to great variation, the manufacturer makes no representation or warranty as to suitability or fitness of these devices for any specific application. While product 

includes an over temperature regulator, misuse may cause failure, damaging the product, mounting surface or work area. Use in a dry area; avoid exposure to moisture. 

Mount free from materials that hinder the transfer of heat.

 

Do not drape or cover product with any material.  Always allow heat to escape.

 

Protect from puncture. Turn 

off when not in use. Use caution as you would with any hot product, especially if you have any issues with loss of feeling in the areas affected by the heat. 

 

 

 

300 N. Oakley Blvd.

 

Chicago, IL   60612

 

USA

 

 

Phone  312-226-2473 

FAX      312-226-2480 

E-mail [email protected] 

www.cozyproducts.com

 

 

1

 

Reviews: