- 10 -
24 V direct current system
If the device is to receive power from a 24 V system, always connect a charging voltage reducer and a 12 V battery
before connecting the device.
Without the battery most voltage voltage reducers will not be enough on its own as it cannot generate the large amount
of current the glow plug requires.
After the 12 V battery, the connection is the same as in a 12 V system. Note, if using remote wire, the remote wire also
needs 12V, not 24V.
For DC DC 24/12 converter ask recommendation from your local dealer. There are major differencies between them.
Checking the connection
The device consumes most power when it is started up (glowing). At this point voltage losses are also at their highest.
During the glowing phase, the voltage must be at least 10 V measured at the quick coupling. See picture. If the voltage
is lower than this, the device may not start.
All wires needs to be mounted with smooth bending and equipped with strain relief.
Connections of the device:
Содержание Spartan
