wallas Spartan, Руководство пользователя

Страница: 13 / 39

- 11 -
Standard packege comes with Control panel(OP), Power cables(12VDC) and Wired Thermostat sensor(Thermo
sensor) and you need to connect all of them to the unit according below presented pictures.
Control panel cable connection point is OP.
Power cable connection point is 12VDC.
Wired Thermostat sensor connection point is Thermo sensor.
And for Spartan Combi unit you should connect Water Circulation pump to Water Pump location.
Accessory installation:
For installations(see page" Solenoid Valve) with solenoid valve(Wallas code 30012) cable connection point is "Valve".
Connecting Main Switch to Turn Off the Device - Blue Wire 363640 (sold separately and see under)
If the heater is needed to be shut down from the boat's main switch, use the remote wire 363640 to the heater, and
connect the another end of the wire to the main switch. The heat will not start without turning the switch ON, and it will
perform a controlled shut down when the switch has been turned OFF.
Please consult your local distributor or this additional manual: