Waldorf QUANTUM, Руководство пользователя

Страница: 78 / 231

Sound Parameter
78 Quantum Manual
K1...6 LowSplit defines the low key split point for level
scaling.
K1...6 HighSplit defines the high key split point for level
scaling.
K1...6 Level controls the overall level of the kernel signal.
This parameter is identical to the corresponding parame-
ter on the Env page.
K1..6 LevelScale is an overall level scaling with three
different modes. This parameter is identical to the corres-
ponding parameter on the Env page.
•
Linear controls the amplitude in a direct way, such
that a linear envelope segment also controls the
amplitude linearly.
•
Quad controls the level in a more curved way by rising
the envelope level to the fourth power.
•
dB lets the envelope control the level on a dB scale.
K1...6 OutPan determines how the kernel signal (which
itself is mono) is panned to the oscillator stereo output.
This is of course only valid for kernels that have been
activated to send to the output by the
Out button. This
parameter is identical to the corresponding parameter on
the Env page.
In addition, the level can be adjusted according to the
played key. If you have set a low and a high key split point,
you can raise or lower the curve depending on the
K1...6
Low and HighBias parameter. Split points and bias can
also be graphically edited by tapping and moving your
finger up or down.
r
The sometimes extreme sonic effect of FM and simi-
lar modulation types makes it necessary to adjust
the level in higher or lower ranges to get a satisfying
overall sonic result.
The Controls Display Page
Tap on one the Controls button to switch to the Controls
dispaly page. If one of the kernels has been edited, please
tap on the
Patch button first.