Sound Parameter
125
Quantum Manual
•
When
Delay
is selected,
Control
determines the
Feed-
back
of the delays.
•
When
Reverb
is selected,
Control
determines the
reverb
Time
.
•
When the
EQ
is selected,
Control
sets the
Frequency
Shifting
of the EQ frequencies.
•
When
Drive
is selected,
Control
determines the
Amount
of the chosen drive type.
•
When
Compressor
is selected,
Control
determines the
Ratio
of the compression.
Effects Display Page
To access the Effects display page for further effect para-
meter press the EFFECTS button. Tap on the correspon-
ding
Effect
tab to select the desired effect unit you want to
edit.
r
The overall editing of the five effect units is similar.
Depending on the selected effect type, different
effect parameters are provided.
r
Hint: Most of the effect parameters can be modula-
ted by any modulation source the Quantum offers.
How to select an effect?
1)
Tap on the desired Effect tab (Effect 1 to 5) you
wish to use.
2)
Tap on the Effect pop-up menu below the Effect
tab button. Hint: You can skip step 1, because
opening an Effect pop-up menu jumps automati-
cally to the corresponding Effect unit.
3)
Select the desired effect from the effect list.
4)
All effect types can only be used once. This
means, for example, that if you have set up the
Delay for Effect 2 and you also select the Delay
for Effect 4, Effect 2 is set to
Off
. All parameter
edits made will be adopted. This enables you to
perform an insert swapping of effects.
5)
After an effect is loaded it can be edited by using
the display page parameters.
Common Effect Parameters
Every effect type offers an
Active
and a
Presets
button.
Tap on it to activate its function:
•
By tapping on
Active
the corresponding effect unit is
set to bypass. No effect signal is generated. Tap on
By-
pass
to unmute the effect again.
Содержание QUANTUM
Страница 1: ...USER MANUAL...
