Sound Parameter
115
Quantum Manual
Komplex Modulator Section
The Komplex Modulator could be described as a complex
LFO with two different curves that can be mixed together,
if desired. The output signal of this section can be used as
modulation source to create morphing atmospheres, dro-
nes, and blurring sounds.
The Komplex Modulator Section
r
To hear result of the Komplex Modulator you should
define it as a modulation source for a desired para-
meter like pitch, filter cutoff frequency, or any other
parameter you like.
Komplex Modulator Panel Parameters
Speed
Determines the frequency of the Komplex Modulator
waveform. At low values it might take four minutes to
perform a complete cycle while higher values go up to the
audible range.
When the Komplex Modulator
Sync
parameter is set to
On
,
you can adjust the
Speed
in musical values. The lowest
possible value is
1024
bars, meaning that a complete cycle
would need 1024 bars.
Blend
Mixes the result of
Curve A
and
Curve B
. The leftmost
setting (
A 100%
) only uses the signal from
Curve A
as
modulation source while the rightmost setting (
B 100%
)
only uses
Curve B
. Other settings morph
Curve A
into
Curve B
, and vice versa.
Warp
The Warp parameter folds the waveform in different ways
depending on the Komplex Modulator shape generated.
The result may look different, based on the initial wave-
form.
Содержание QUANTUM
Страница 1: ...USER MANUAL...
