Waldorf QUANTUM, Руководство пользователя

Страница: 203 / 231

Loading & Editing Samples
203 Quantum Manual
Selected Sample
If more than one sample is loaded, you can use this para-
meter to select the desired sample for editing. You can also
tap on the desired sample file in the display list to select it.
Sample Start / Sample End
Here, you determine the start position ( Sample Start ) and
end position ( Sample End ) of the currently selected samp-
le. Use this function to adapt the sample length to your
needs. Within the waveform representation two green
rulers shows the loop start and end.
Tap on Sample Start or Sample End to open a pop-up
menu for further settings:
•
Normal : parameter change is normal.
•
Fine : parameter change is fine.
•
Super Fine : parameter change is super fine.
Pitch
Determines the pitch of the currently selected sample. Use
this parameter to tune samples that don’t match with your
desired tone pitch.
Tap on Pitch to open a pop-up menu for further settings:
•
Normal : Pitch change is about 10.0 cents.
•
Fine : Pitch change is about 1.0 cents
•
Super Fine : Pitch change is about 0.1 cents.
•
Set From Keys : play a key on your keyboard to set the
corresponding pitch.
Loop Start/ Loop End
If Loop Mode is set to On , you can define a Loop Start and
Loop End . Within the waveform representation two yel-
low rulers shows the loop start and end.