Waldorf QUANTUM, Руководство пользователя

Страница: 65 / 231

Sound Parameter
65 Quantum Manual
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Acceleration
Controls the repeat speed behaviour. Positive settings
accelerate the speed of the repeats in time while negative
settings will slow it down accordingly.
Tap on Acceleration to open a pop-up menu for further
settings:
•
Normal : Acceleration change is about 0.01.
•
Fine : Acceleration change is about 0.001.
•
Super Fine : Acceleration change is about 0.0001.
•
Set Default : sets Acceleration to its default value of
+ 0 . 0 %.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Timbre Mode
Here you can select different modes that affect the partial
editing when using the
Timbre parameter.
•
Peak Mode : in the lowest Timbre setting the partials
fade out exponentially. This sounds as a sawtooth
wave. Higher settings create a partial shift with rand-
om peaks. The maximum setting emphasizes every 2nd
partial so that the result sounds like a square wave.
•
Sin Mod : this mode exhibits almost the same behavio-
ur as the Peak mode, except that the maximum setting
results in a triangle wave sound.
•
Saw-Square : this mode starts from a regular partial
fade out and removes most of the 2nd partials as
Timbre is turned up. The result sounds like a square
wave.
•
Sin-Saw : this mode starts with a sine-like sound (only
the fundamental note is heard). It adds more and more
partials as
Timbre is turned up. The result sounds like
a sawtooth wave.
•
Modulo : in the lowest Timbre setting the partials fade
out exponentially. This sounds like a sawtooth wave.
The more
Timbre is turned up, the more partials will
suddenly disappear. This leads to a less complex
sound.