Waldorf QUANTUM, Руководство пользователя

Страница: 66 / 231

Sound Parameter
66 Quantum Manual
Tap on Timbre Mode to open a pop-up menu for further
settings:
•
Set Default : sets Timbre Mode to its default Peak Mod
setting.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Spread Mode
Here you can determine the distance of the partials when
using the
Stretch parameter.
•
Stretch : uses a wide range of stretching. The Stretch
parameter can produce drastic changes to the timbre
of a sound.
•
Stiffness : uses a smaller range of stretching. The re-
sults of the Stretch parameter are less drastic.
Tap on Spread Mode to open a pop-up menu for further
settings:
•
Set Default : sets Spread Mode to its default Stretch
setting .
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
HiCut
Determines the hi-cut frequency for cutting high frequen-
cies. This filter is located between the exciter and the filter
bank. Use it if the exciter signal is producing too many
overtones.
Tap on HiCut to open a pop-up menu for further settings:
•
Set Default : sets HiCut to its default value of 0.10.
•
Set Last Loaded : resets the parameter to the last
loaded value from the current sound patch.
•
MIDI Learn CC : activates MIDI Learn, which maps an
incoming MIDI control change to this parameter.
Stereo
Spreads the signal in the stereo field. Keep in mind that if a
signal is routed through the Dual Analog Filter section, it
automatically becomes mono because of the mono signal
path within this circuitry. If you want to hear the full ste-
reo effect, you should route the signal directly to the VCA