Walchem WebMaster, Инструкция по эксплуатации

Страница: 36 / 178

32
4.6.3 Ethernet Connection to LAN
Equipment Required
 An Internet-ready computer.
 A connection between the PC and the local area network (LAN).
 An Ethernet connection between the WebMasterONE and the LAN.
Utilities you need to set up on your computer
 There are no special drivers, adapters or other software components required on the PC.
Parameters that need to be programmed into the WebMasterONE
 Prior to attempting an Ethernet connection, the following information needs to be entered into
the Communication page of the WebMasterONE, either via an USB connection or via the
local keypad. This information must be provided by the IT Administrator of the LAN.

The Ethernet IP address of the WebMasterONE. If the controller will only be accessed by
computers on the LAN then this may be a local IP address. If the controller needs to be
accessible by computers not on the LAN then this must be an Internet accessible IP address.
 The Subnet Mask.
 The Gateway IP address.
Steps Required to Establish a Connection
 Open Internet Explorer.
 Type in the Ethernet IP address that has been assigned by the IT Administrator.
 The sign-on screen of the WebMasterONE will come up. Type the User Name and Password
(Access Code) in the text boxes and click the Submit button. The default user name is
"webmaster" and the default passwords are "2001" for full access, "2002" for calibration only,
and "2003" for read only. These defaults can and should be changed in the Access Code page.