Wake N Grill Page 9
Note:
For U-Channel brackets, check hole
alignment using mounting bolts to ensure proper
fit before proceeding.
Step 10:
Install Flat Mount.
Install the Flat
Mount onto the swim platform bracket using (
See
Figure 18
):
Washers WNG-1/4 Flat (QTY 4)
•
Nuts WNG-1/20-B-NUT (QTY 4)
•
1/4”-20 X (1”, 1.25”, or 2”) Socket Head Cap
•
Screws (QTY 4)
If multiple bolt sizes are provided in your kit, use
the best fit length for your boat with at least 3
threads protruding beyond the nut.
See Figure
19.
NOTE:
The washers should be installed on the
nut side of the bolt between the nut and platform
bracket.
See Figure 19.
Tighten all 4, 1/4”-20 Socket Cap Screws in a
cross pattern. Complete the tightening sequence
twice to ensure everything is properly seated.
Proceed to next section (Lower Tube Installation).
Flat Mount Installed
Figure 18.
Backside of Flat Mount
Figure 19.
