Flat Mount Installation:
Step 1:
Locate Parts. Unwrap and inventory the
following parts in preparation for assembly:
Lower Tube Assembly (WNG-LWR-TB, QTY 1)
1.
Hirth Joints (WNG-HIRTH, QTY 2)
2.
Flat Mount (WNG-FLAT-CLAMP, QTY 1)
3.
1/4”-20 x 5/8” Flat Head Cap Screws (QTY 6)
4.
1/2”-13 x 2-1/4” Socket Head Cap Screw
5.
(QTY 1)
Pull-Pin (WNG-PULL-PIN, QTY 1)
6.
Washers (WNG-1/4 Flat, QTY 4)
7.
Nuts (WNG-1/20-B-NUT, QTY 4)
8.
The following parts may vary based on Boat
Model:
1/4”-20 x 1” Socket Head Cap Screw (QTY 4)
•
1/4”-20 x 1-1/4” Socket Head Cap Screw
•
(QTY 4)
1/4”-20 x 2” Socket Head Cap Screw (QTY 4)
•
NOTE:
Temporarily remove or disconnect and
underwater gear or wake devices to gain clear
access to both sides of the selected swim platform
bracket.
Step 2:
Lower Tube prep.
Temporarily install the
Lower Tube Assembly onto the Flat Mount using
the 1/2”-13 x 2-1/4” Socket Head Cap Screw.
See Figure 8.
Moving the assembly around by hand, trial fit the
Flat Mount on the swim platform bracket ensuring
the bolt holes are over the swim platform bracket.
Adjust the position to keep the mounting holes
on the Flat Mount over the platform bracket while
moving the Lower Tube towards the rear of the
swim platform, but not to protrude beyond the
platform. The end of the lower tube should be
even with the rear edge of the swim platform.
See Figure 9.
HINT:
The Lower Tube Assembly and Flat Mount
can be installed on either side of the swim
platform bracket. Choose the best fit for your
application depending on the swim platform, size,
and shape.
Make sure the Lower Tube is easily accessible but
not protruding beyond the platform. Also, ensure
the tube does not interfere with other features
such as surf tabs or exhaust systems etc.
Step 3:
Identify bracket type.
There are two
types of swim step brackets, U-channel and solid.
Identify which brackets you have by referencing
Figure 10 and Figure 11
.
NOTE:
The Flat mount clamp is designed
to fit a wide variety of swim platform
brackets from different manufacturers.
The Flat Mount does not have to be in
any particular position nor does it need
Wake N Grill Page 6
6ZLP6WHS
6ZLP6WHS%UDFNHW
)ODW0RXQW
/RZHU7XEH
$VVHPEO\
[
HDG
&DS6FUHZ
6ZLP6WHS
6ZLP6WHS%UDFNHW
)ODW0RXQW
/RZHU7XEH
$VVHPEO\
Flat Mount Temp Assembly
Figure 8.
Flat Mount Trail Fit
Figure 9.
U-Channel Swim Step Bracket
Figure 10.
