align the plate’s Spring Pin with the anti-rotation
hole in the plug.
NOTE:
Hand pressure may be necessary to fully
seat the plug. Alternatively the plug and bolt
may be installed simultaneously to help align the
threads and seat the plug while tightening the
bolt.
Step 3:
Secure Grill Plug.
Apply Loctite 243
threadlocker (included) to the threads of plug
bolt, 3/8”-16 X 1-3/4” Socket Cap Screw. Insert
bolt through the plug, and thread the bolt into the
plate. Torque bolt to approximately 10 ft-lbs, do
not overtighten the bolt.
Step 4:
Cutting Board Lock.
Remove the
cutting board fin lock #WNG-FIN-LOC from the
packaging. It should include 2 nylon washers and
a 10-24 x 3/4” Socket Cap Screw.
NOTE:
The fin lock has two threaded holes, one
is marked with a gold dot which identifies the hole
to use for installation of the bolt.
Install the WNG-FIN-LOC on top of the grill
plate opposite the logo as shown. Ensure one
nylon washer is on either side of the plate to
allow rotation. Tighten bolt as desired for lock
operational resistance.
See Figure 6.
Step 5:
Mount Grill To Plate.
Remove supplied
grill from packaging. Locate 4 carriage bolts
and 4 self locking nuts included with the
manufacturer’s grill hardware. If equipped,
remove the grease trap on the bottom of the grill
to access the grill mounting bracket holes.
See
Figure 7.
With the WNG-GRL-PLT logo up, align the grill
mounting holes over the plate holes. The handle
of the grill should be aligned with the logo of the
plate (front).
Install Carriage bolts (heads facing up) down
through the grill mounting holes and WNG-GRL-
PLT. Install 4 nuts onto the bolts and tighten grill
assembly to the plate.
See Figure 7.
NOTE:
The carriage bolts are captive and should
be held by the grill mount while tightening the
nuts.
Wake N Grill Page 5
*ULOO
6WDLQOHVV1XW
;
&DUUDLJH%ROW
;
0RXQWLQJ
3ODWH$VVHPEO\
0DQXIDFWXUHU
6XSSOLHG
KDUGZDUH
PD\YDU\
IURPZKDWLV
VKRZQ
[6RFNHW
+HDG&DS6FUHZ
8PEUHOOD$UP
[)ODW
+HDG&DS6FUHZ
;
8PEUHOOD3OXJ
[6SULQJ3LQ
),1
/2&:DVKHU
;
:Q*),1/2&
0RXQWLQJ3ODWH
[6RFNHW
+HDG&DS6FUHZ
*ULOO3OXJ
2SWLRQDO
Mounting Plate Assembly
Figure 6.
Grill/Plate Assembly
Figure 7.
