Wake N Grill Page 16
releasing from the Upper Tube. In addition, the
Grill Plug features a positioning hole to fully lock
the grill in rotational alignment with the Pull-Pin.
In this position, the Pull-Pin is fully engaged and
the Grill will become set in rotational position.
This is useful to prevent the grill from turning
when the Umbrella is deployed or absolute
rotational postitioning is desired.
See Figure 32.
Step 4: Install Cutting Board.
Position the
cutting board onto the Grill Plate by first aligning
the Cutting Board bracket with the mating bracket
on the Grill Plate. Next, angle the Cutting Board
upwards and insert the rounded profile into the
Grill Plate bracket. Once engaged, the Cutting
Board can be lowered to fully engage and lock
into the Grill Plate bracket.
See Figure 33.
Next, turn the Fin Lock over the top edge of the
Cutting Board. The lock will keep the cutting
board in the down position and prevent lifting.
HINT:
Don’t forget the Fin Lock, those surfers
come out of nowhere and could ruin your lunch.
Reminder:
Practice the above steps on land
until you are comfortable with the entire process.
Setting up the grill on the water should be a
simple process and a safe process.
Step 5: Fire up the Grill!!
The following steps
should be performed in accordance with the grill
manufacturers instructions.
Install propane regulator (if removable) and
propane tank. Ignite the grill according to grill
manufacture’s instructions.
Pro Tip:
Use the included tray to serve up some
grilled goodness to the masses. Most importantly,
have some fun.
THIS COMPLETES THE DEPLOYMENT OF THE WAKE N
GRILL.
Deploying/Stowing Umbrella (Op-
tional):
CAUTION:
The Wake N Grill Umbrella is designed
to deploy while the boat is moored in calm
conditions. Use of the product while underway
or in windy conditions (even slightly windy) can
cause damage or injury and is not covered under
warranty.
Step 1:
Remove the Umbrella (WNG-UMB) from its
case.
NOTE:
Take care when removing the Umbrella from
it’s storage case when on the water. The Umbrella
stows in two peices and may come out of the bag
unpredictably....and end up a fish habitat.
Step 2: Deploy Umbrella.
Insert the umbrella
$
6WHSD/LIWDQGLQVHUWFXWWLQJ
ERDUGLQWRFKDQQHORQJULOOSODWH
&ORVHXS9LHZ$
6WHSE/RZHU&XWWLQJ%RDUG
XQWLOVHDWHGDQGORFNHGLQWR
FKDQQHORQJULOOSODWH7KHQ
WXUQ)LQ/RFNDVVKRZQ
)LQ/RFN
*ULOO3OXJ
6DIHW\*URRYH
3RVLROH
Grill Plug Groove and Hole
Figure 32.
Cutting Board Install
Figure 33.
