manualshive.com logo in svg

WAGO 750-830, Руководство пользователя

Поделиться
Скачать
WAGO 750-830 Скачать руководство пользователя страница 2

2

  •  

General 

 

 

 

 

 

 

 WAGO-I/O-SYSTEM 

750 

BACnet/IP Controller 

Copyright © 2008 by WAGO Kontakttechnik GmbH & Co. KG 
All rights reserved. 

The contents of this documentation are taken in part from the BACnet Stan-
dard 135-2004 or are based on the original contents. These contents are sub-
ject to copyright. 

The following applies to these contents: 

©2004, American Society of Heating, Refrigerating and Air-Conditioning En-
gineers, Inc. (www.ashrae.org). Reprinted by permission from 2004 ASHRAE 
Standard-135. This material may not be copied nor distributed in either paper 
or digital form without ASHRAE’s permission. 

The following applies for the BACnet logo: 

BACnet® is a registered trademark of ASHRAE. 
 

 

WAGO Kontakttechnik GmbH & Co. KG 

Hansastraße 27 
D-32423 Minden 

Phone:  +49 (0) 571/8 87 – 0 
Fax: 

+49 (0) 571/8 87 – 1 69 

E-Mail: 

[email protected]

 

Web: 

http://www.wago.com

  

Technical Support 

Phone:  +49 (0) 571/8 87 – 7 77 
Fax: 

+49 (0) 571/8 87 – 87 77 

E-Mail: 

[email protected]

 

 

 

 

Every conceivable measure has been taken to ensure the correctness and com-
pleteness of this documentation. However, as errors can never be fully ex-
cluded we would appreciate any information or ideas at any time. 

E-Mail: 

[email protected]

 

We wish to point out that the software and hardware terms as well as the 
trademarks of companies used and/or mentioned in the present manual are 
generally trademark or patent protected. 

Содержание 750-830









































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды