WAGO 750-8207 Скачать руководство пользователя страница 61

Страница: 61 / 410

WAGO-I/O-SYSTEM 750

Function Description 61

750-8207 PFC200 CS 2ETH RS 3G

Manual

Draft version 1.2.1 from 2017-09-13, valid from FW Version 02.06.20(09)

There are two possibilities here:

Default Route

If the “default” value is entered in the

Destination Address

field, a default

route is defined. The

Destination Mask

field must then have the value

“0.0.0.0.”

Route

If an IP address or an address pool is entered in the

Destination Address

field, all data is sent to the IP address or the address pool via the entered

gateway address.

The gateway metric here has an important function. This determines the

costs of the connection.

For example, if two identical address pools are defined (192.168.1.0/24)

[IP:192.168.1.1-192.168.1.254], one with a metric of 20 and the second

with 192.168.1.2 and a metric of 10, the gateway with the lowest metric is

used.

If the address 192.168.1.2 in the above example is no longer available,

e.g., due to failure, the alternative route is used automatically.

Содержание 750-8207



























































































































































































































































































































































































































Результаты поиска

Содержание 750-8207

Отзывы:

Похожие инструкции для 750-8207

Бренды по названию

Популярные бренды

WAGO 750-8207, Руководство пользователя

Результаты поиска

Содержание 750-8207

Отзывы:

Похожие инструкции для 750-8207

Бренды по названию

Популярные бренды