97
VERSION 10/2018
ORDER NUMBER DOC 2339321
.
9
CLEANING AND MAINTENANCE
9.1
CLEANING
9.1.1 CLEANING PERSONNEL
Cleaning work should be undertaken regularly and carefully by qualified and trained personnel.
They should be informed of specific hazards during their training.
The following hazards may arise during cleaning work:
– risk to health from inhaling solvent vapors,
– use of unsuitable cleaning tools and aids.
9.1.2 SAFETY INSTRUCTIONS
Before all work on the device and in the event of work interruptions:
− Switch off the energy and compressed air supply.
− Relieve pressure from spray guns, high-pressure hoses and all devices.
− Secure spray guns against actuation.
− Disconnect the control unit from the mains.
9.1.3 FILTER CLEANING
For information on cleaning the product filter see Chapter
.
9.1.3.1 CONDENSATE DRAINAGE FROM THE FILTER PRESSURE REGULATOR
Frequently drain the condensate that may accumulate in the pneumatic filter.
– Make sure the water level in the filter cup never reaches the max. level marked
on the cup.
WARNING
Brittle filter pressure regulator!
Flying parts can cause injury.
The tank on the filter pressure regulator becomes brittle through contact with solvents
and can burst.
Do not clean the tank on the filter pressure regulator with solvents.
