WAGNER Plast Coat 430, Руководство по эксплуатации

Страница: 44 / 116

44
Plast Coat 430
GB
6.8
PREPARING THE MORTAR SPRAYING MACHINE
(FIG. 16)
Recommended sliding means for the mortar hose
Water is not sufficient as a sliding means.
Danger of clogging!
6TF DFMMVMPTF QBTUF FH .FUZMBO XBMMQBQFS
paste, art no. 2312136)
t 'JMMoMDFMMVMPTFQBTUFJOUPBTVJUBCMFDPOUBJOFS
t $POOFDUUIFNPSUBSTQSBZJOHNBDIJOFUPUIFNBJOTTVQQMZ
The operation light (1) shows operational readiness.
t 1MBDFDPOUBJOFSVOEFSNPSUBSTQSBZJOHNBDIJOF
t 1VMMTBGFUZQJO UPUIFSFBSBOEQSFTTEPXONPSUBSTQSBZ
-
ing machine frame (3) until machine engages in the bottom
position.
Risk of injury from escaping material.
Before switching on, always check that the
material tap on the spray lance is closed
(material tap points forwards).
Close material tap whenever stopping
work.
t 4FUTFMFDUPSTXJUDI UPi"w
t 4FUEFMJWFSZWPMVNFDPOUSPMMFS UPvi
6.8.1
RINSE THE MORTAR HOSE
(AUTOMATIC SPRAY LANCE)
t Close the air flow regulator (fig. 17.2).
Do not bend the mortar hose!
Protect it against damage, for exam-
ple against being driven over as well as
against sharp objects and edges.
t )PMEUIFTQSBZMBODFPWFSUIFDPOUBJOFS
t 0QFONBUFSJBMUBQ 'JHPOTQSBZMBODF NBUFSJBMUBQBU
¡UPTQSBZMBODFUIFNPSUBSTQSBZJOHNBDIJOFJTTXJUDIFE
on.
t If cellulose paste comes out of the tip, close the material tap
(fig. 17, 1) (material tap points forwards).
t 3FQMBDFDPOUBJOFSBOEMVCSJDBOUXJUIDPOUBJOFSBOEDPBUJOH
material.
t )PMETQSBZMBODFBCPWFDPOUBJOFSXJUIDFMMVMPTFQBTUF
t 0QFONBUFSJBMUBQ 'JHPOTQSBZMBODF
t "T TPPO BT DPBUJOH NBUFSJBM FYJUT GSPN TQSBZ MBODF
close material tap (Fig. 17, 1).
5IFNPSUBSTQSBZJOHNBDIJOFJTOPXGVMMBOESFBEZ
COMMISSIONING
A
F R
POWER
ERROR
>
1
2
3
4
5
?
1
2