WAGNER Plast Coat 430, Руководство по эксплуатации, Страница: 45 / 116

45
Plast Coat 430
GB
6.8.2
RINSE THE MORTAR HOSE
(PNEUMATIC SPRAY LANCE)
t 4XJUDIPòDPNQSFTTPS
Do not bend the mortar hose!
Protect it against damage, for exam-
ple against being driven over as well as
against sharp objects and edges.
t )PMEUIFTQSBZMBODFPWFSUIFDPOUBJOFS
t
Set selector switch to “F”.
t 0QFONBUFSJBMUBQ 'JHPOTQSBZMBODF .BUFSJBMUBQBU
¡UPTQSBZMBODF
t If cellulose paste comes out of the tip, close the material tap
(fig. 18, 1) (material tap points forwards).
t 4FUTFMFDUPSTXJUDIUPi"w
t 3FQMBDFDPOUBJOFSBOEMVCSJDBOUXJUIDPOUBJOFSBOEDPBUJOH
material.
t )PMETQSBZMBODFBCPWFDPOUBJOFSXJUIDFMMVMPTFQBTUF
t
Set selector switch to “F”.
t 0QFONBUFSJBMUBQ 'JHPOTQSBZMBODF
t "TTPPOBTDPBUJOHNBUFSJBMFYJUTGSPNTQSBZMBODFDMPTFNB
-
terial tap (Fig. 18, 1).
t 4FUTFMFDUPSTXJUDIUPi"w
t 4XJUDIPODPNQSFTTPS
5IFNPSUBSTQSBZJOHNBDIJOFJTOPXGVMMBOESFBEZ
6.9
BEGINNING OF THE SPRAYING PROCESS
t Open the air flow regulator (fig. 18, 3) and the material tap
BUUIFTQSBZMBODF
t "EKVTU UIF øPX PG NBUFSJBM XJUI UIF EFMJWFSZ WPMVNF DPO -
USPMMFS öHPOUIFDPOUSPMVOJUBOETFUUIFBJSRVBOUJUZ
CZ BEKVTUJOH UIF BJS øPX SFHVMBUPS öH UP BUUBJO UIF
EFTJSFETQSBZQBUUFSO
Important: Do not let the mortar spraying
machine run dry. Switch the device off im-
mediately if no more material comes out of
the tip or if the spray line becomes irregu-
lar. Possible reasons for the problem and
how to correct it can be found in the chap-
ter called „Eliminating faults“.
Increased material tap wear. Do not use the
material tap to set the material volume.
The delivery volume controller should be
used for this purpose.
6.10
END OF THE SPRAYING PROCESS
t $MPTFUIFNBUFSJBMUBQ Fig. 18, 1).
t $MPTFUIFBJSøPXSFHVMBUPS öH
Always close material tap at end of the
spray process.
COMMISSIONING
@
1
3
2
A
F R
POWER
ERROR