WAGNER Plast Coat 430, Руководство по эксплуатации

Страница: 42 / 116

42
Plast Coat 430
GB
6.3
CONNECTING THE MORTAR HOSE
6.3.1
AUTOMATIC SPRAY LANCE
t $IFDLUIBUUIFQVNQVOJUJTTFBUFEöSNMZ
t
Connect the mortar hose (Fig. 7, 1) and secure it with the
clamping levers (Fig. 7, 2).
t Connect the atomizing air connection at the mortar hose
UPUIFDPNQSFTTFEBJSTVQQMZGPSFYBNQMFUIFDPNQSFTTPS
BDDFTTPSZ
6.3.2
PNEUMATIC SPRAY LANCE
t $IFDLUIBUUIFQVNQVOJUJTTFBUFEöSNMZ
t $POOFDU NPSUBS IPTF 'JH BOE TFDVSF XJUI DMBNQJOH
levers (Fig. 7, 2).
t $POOFDUBUPNJTJOHBJSDPOOFDUJPOPONPSUBSIPTFUPGSPOU
connection on handle (Fig. 8,1) and compressor air hose (ac-
DFTTPSZUPSFBSDPOOFDUJPOPOIBOEMF 'JH
6.4
COMPRESSOR (ACCESSORY)
Place the compressor at a secure location next to the mortar
TQSBZJOHNBDIJOFBOEDPOOFDUJUUPUIFNBJOTOFUXPSL
Note:
0OMZPQFSBUFUIFDPNQSFTTPSJOBDDPSEBODFXJUIUIFFODMPTFE
operating manual.
6.5
SPRAY ATTACHMENT ASSEMBLY (ACCESSORIES)
Different accessories can be mounted to the
TQSBZ MBODF EFQFOEJOH PO UIF BQQMJDBUJPO
e.g. an extension can be attached. A precise
overview can be found in the “Accessories”
chapter.
t Disengage the quick connector and pull the air hose (fig. 9,
1) out of the lance.
t Loosen the locknut (2) and remove the material hose (3).
t Insert the material hose and air hose (if available), which
BSF QBSU PG UIF BDDFTTPSZ JOUP UIF TQSBZ MBODF BOE TFDVSF
CZUJHIUFOJOHUIFMPDLOVU 'JH
Attention: Make sure the O-ring (fig. 10, 4) is not dam-
aged.
COMMISSIONING
5
2 1
1 2
6
7
3
1
2
8
4