manualshive.com logo in svg

WAGNER Jaguar, Руководство по эксплуатации

Поделиться
Скачать
WAGNER Jaguar Скачать руководство пользователя страница 9

9

150 cm

3

 - 300 cm

3

 

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

2 

CORRECT USE

2.1 

DEVICE TYPES

2.2 

TYPE OF USE

2.3 

USE IN AN EXPLOSION HAZARD AREA

Pneumatic pump with spraypack:

The device is suitable for processing liquid materials like paints and lacquers in accordance 
with the classifi cation into explosion classes IIA or IIB.

The pneumatic pump can be employed in explosion hazard zones (Zone 1).   See Chapter 3.

2.4 

SAFETY PARAMETERS

WAGNER accepts no liability for any damage arising from incorrect use.

Use the device only to work with the products recommended by WAGNER.

Only operate the device as a whole.

Do not deactivate safety fi xtures.

Use only WAGNER original spare parts and accessories.

The pneumatic pump may only be operated under the following conditions:

The operating staff  must be trained on the basis of this operating manual.

The safety regulations listed in this operating manual must be observed.

The operating, maintenance and repair information in this operating manual must 
be observed.

The statutory requirements and accident prevention regulation standards in the 
country of use must be observed.

Содержание Jaguar





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды