manualshive.com logo in svg

WAGNER Jaguar, Руководство по эксплуатации

Поделиться
Скачать
WAGNER Jaguar Скачать руководство пользователя страница 33

33

150 cm

3

 - 300 cm

3

 

B_04266

5

6

4

1

3

2

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

6.4 

ASSEMBLING THE PUMP

Note:

This pump can be used as part of a spraying system for Airless applications. The individual 
components are shown in the accessories, or can be arranged with a spraypack confi gurator. 
The nozzles must be selected according to the gun operating manual.

Procedure:

a) Mount pump (1) on frame, trolley (6), or wall mount. When using a wall mount, the 

fl uid section must be turned by 180°.

b) Mount high pressure fi lter (3).
c) Mount suction system (5).
d) Mount return tube (4) or return hose.
e) Connect high-pressure hose and gun (2) as laid down in the operating manual for the 

gun.

Airless system

6.4.1 

VENTILATION OF THE SPRAY BOOTH

  Operate the device in a spray booth approved for the working materials.

 -or-

  Operate the device on an appropriate spraying wall with the ventilation (extraction) 

switched on.

  Observe national and local regulations for the outgoing air speed.

Observe the safety instructions in Chapter 4.1.3.

Содержание Jaguar





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды