WAGNER Jaguar Скачать руководство пользователя страница 38

Страница: 38 / 92

150 cm

- 300 cm

B_04268

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

7.5

PRESSURE RELIEF/WORK INTERRUPTION

If the system has been used with 2K products:

1. Close the spray gun.
2. Close ball valve (2).
3. Release the system by opening the gun.

Attention: If a blocked nozzle is preventing relief, fi rst carry out the additional
steps 4 and 5, then clean the nozzle.

4. Close and secure gun.

5. Open and close the return valve (3) slowly to completely depressurize the system.

Hardened working material in the spraying system when 2K product is processed!

Destruction of pump and injection system.

  Follow the manufacturer‘s processing rules, particularly regarding the pot life.
  Flush thoroughly before the end of the pot life.
  The pot life is decreased by warmth.

NOTICE

Closed

Open

7.4

SPRAYING

1. Visual check: personal safety

equipment, grounding and
all devices ready to use.

2. Secure the spray gun and

place the nozzle in the gun.

3. Set required working

pressure on the pressure
regulator (1).

4. Slowly open the ball valve (2).
5. Optimize the spraying results

as laid down in the gun
instructions.

6. Start work process.

Содержание Jaguar





























































































Результаты поиска

Содержание Jaguar

Отзывы:

Бренды по названию

Популярные бренды

WAGNER Jaguar, Руководство по эксплуатации

Результаты поиска

Содержание Jaguar

Отзывы:

Бренды по названию

Популярные бренды