manualshive.com logo in svg

WAGNER Jaguar, Руководство по эксплуатации

Поделиться
Скачать
WAGNER Jaguar Скачать руководство пользователя страница 6

6

150 cm

3

 - 300 cm

3

 

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

1.2 

WARNINGS, NOTICES AND SYMBOLS IN THESE INSTRUCTIONS

1 

ABOUT THESE INSTRUCTIONS

Warning instructions in this operating manual highlight particular dangers to users and to 
the device and state measures for avoiding the hazard. These warning instructions fall into 
the following categories:

Danger

 - immediate risk of danger.

Non-observance will result in death or serious injury.

Warning

 - possible imminent danger.

Non-observance may result in death or serious injury.

Caution

 - a possibly hazardous situation.

Non-observance may result in minor injury.

Notice 

- a possibly hazardous situation.

Non-observance may result in damage to property.

Note

 - provides information about particular characteristics and how to proceed.

This notice warns you of a hazard!
Possible consequences of not observing the warning instructions.
The signal word indicates the hazard level.

The measures for preventing the danger and its 
consequences.

DANGER

This notice warns you of a hazard!
Possible consequences of not observing the warning instructions.
The signal word indicates the hazard level.

The measures for preventing the danger and its 
consequences.

WARNING

This notice warns you of a hazard!
Possible consequences of not observing the warning instructions.
The signal word indicates the hazard level.

The measures for preventing the danger and its 
consequences.

CAUTION

This notice warns you of a hazard!
Possible consequences of not observing the warning instructions. The signal word 
indicates the hazard level.

The measures for preventing the danger and its consequences.

NOTICE

1.1 

PREFACE

The operating manual contains information about safely operating, maintaining, cleaning 
and repairing the device.
The operating manual is part of the device and must be available to operating and service 
staff .
The device may only be operated by trained staff  and in compliance with this operating 
manual. Operating and service personnel should be instructed according to the safety 
instructions.
This equipment can be dangerous if it is not operated according to the instructions in this 
operating manual.

Содержание Jaguar





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды