WAGNER Jaguar Скачать руководство пользователя страница 37

Страница: 37 / 92

150 cm

- 300 cm

B_04267

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

7.2.1

GENERAL RULES FOR MAKING ADJUSTMENTS TO THE SPRAY GUN

High pressure spray jet!

Danger to life from injecting paint or solvent.

  Never reach into the spray jet.
  Never point the spray gun at people.
  Consult a doctor immediately in the event of skin injuries caused

by paint or solvent. Inform the doctor about the paint or solvent
used.

Never seal defective high-pressure parts; instead relieve the

pressure from them and replace them.

Use personal protective equipment (protective clothing, gloves,

eyewear and respiratory protection).

WARNING

Observe spray gun operating manual.

In the case of unforeseen occurrences, immediately:

- close ball valve (2);

- open return valve (3).

7.3

EMERGENCY STOP

Gas mixtures can explode if there is an incompletely ﬁlled
pump!

Danger to life from fl ying parts.

Ensure that the pump and suction system are always completely

ﬁlled with fl ushing agent or working material.

Do not spray the device empty after cleaning.

WARNING

Open

Closed

Open

Содержание Jaguar





























































































Результаты поиска

Содержание Jaguar

Отзывы:

Бренды по названию

Популярные бренды

WAGNER Jaguar, Руководство по эксплуатации

Результаты поиска

Содержание Jaguar

Отзывы:

Бренды по названию

Популярные бренды