manualshive.com logo in svg

WAGNER Jaguar, Руководство по эксплуатации

Поделиться
Скачать
WAGNER Jaguar Скачать руководство пользователя страница 43

43

150 cm

3

 - 300 cm

3

 

B_03918

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

1. Check the level of separating agent in the separating agent cup every day, and top 

up if necessary.

2. Check and clean the high-pressure fi lter every day or as required. (See Chapter 8.2.7)
3. Every shut down should be carried out as laid down in Chapter 8.1.3!
4. Check hoses, pipes, and couplings every day and replace if necessary.

If the pump has to be emptied for maintenance work, proceed according to Chapter 8.2.5.

The service manual is available in German and English.
For order number see Chapter 1.3.

8.2.3 

REGULAR MAINTENANCE WORK

8.2.4 

FILLING SEPARATING AGENT

Place the supplied separating agent into the separating agent cup.
Filling level:

1 cm; 0.4 inch under the cup edge.

Separating agent:

Order No. 9992504

Inclination angle of the pump

Maximum permissible inclination of pump for moving, transportation, 
etc. after fi lling it with separating agent ± 30°.
The pump must be vertical during operation.

Piston pump dry run!

High wear/damage to the packings.
Paint or solvent can escape if the seals are dry.

  Ensure that the separating fl uid tank is fi lled with suffi

  cient separating fl uid. Filling 

level 1 cm; 0.4 inch under the cup edge.

NOTICE

Содержание Jaguar





























































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды