WAGNER Jaguar Скачать руководство пользователя страница 18

Страница: 18 / 92

150 cm

- 300 cm

OPERATING MANUAL

VERSION 05/2015

ORDER NUMBER DOC2340282

4.2.6

TOUCHING HOT SURFACES

Only touch hot surfaces if you are wearing protective gloves.
When operating the device with a coating product with a temperature of > 43 °C;

109 °F: identify the unit with a warning label that says "Warning - Hot Surface".

- Instruction label

Order No. 9998910

- Protection label

Order No. 9998911

Note:

Order the two stickers together.

Only electrically conductive tanks may be used for cleaning and fl ushing agents.
The containers must be grounded.

An explosive gas/air mixture forms in closed containers.

Never spray into a closed tank when using solvents for fl ushing.

External cleaning

When cleaning the exterior of the device or its parts, also observe the following:

Disconnect the pneumatic supply line.
Use only moistened cloths and brushes. Never use abrasive agents or hard objects and

never spray cleaning agents with a gun. Cleaning the device must not damage it in any
way.

Ensure that no electric component is cleaned with or immersed into solvent.

4.2.5

HANDLING HAZARDOUS LIQUIDS, VARNISHES AND PAINTS

When preparing or working with lacquer and when cleaning the device, follow the

working instructions of the manufacturer of the lacquers, solvents and cleaning agents
being used.

Take the specifi ed protective measures. In particular, use personal protective equipment:

safety goggles, protective clothing and gloves, as well as respiratory protection and
skin protection cream if necessary.

Use a mask or breathing apparatus if necessary.
For suffi

cient health and environmental safety: Operate the device in a spray booth or

on a spraying wall with the ventilation (extraction) switched on.

Wear suitable protective clothing when working with hot products.

Содержание Jaguar





























































































Результаты поиска

Содержание Jaguar

Отзывы:

Бренды по названию

Популярные бренды

WAGNER Jaguar, Руководство по эксплуатации

Результаты поиска

Содержание Jaguar

Отзывы:

Бренды по названию

Популярные бренды