Installation
Page 18
LCD monitor cabling diagram
Cintiq, rear view
– B –
Video card
DVI or VGA
Rear panel of your computer
Do not attach the USB data
cable until instructed to do so.
Power adapter
– C –
DC I
N
put
To AC outlet
DVI-I connector
To connect to a DVI-D connector,
use the DVI-D to DVI-I adapter.
To connect to a VGA connector,
use the VGA to DVI-I adapter.
– D –
C
AUTION
Make sure your video card has a
DVI or VGA connector, and that
you correctly set the Cintiq
Digital/Analog (DVI/VGA) switch
for the video connector you are
using.
C
AUTION
Use only the power adapter that came with Cintiq;
use of an improper power adapter may
damage the unit.
Do not connect or disconnect the video or power cables while Cintiq or your computer
are turned on –
this can damage the LCD monitor or computer video card.
Make sure that the display refresh rate does not exceed 85 Hz (60 Hz for UXGA).
D
IGITAL
/A
NALOG
(DVI/VGA) switch
– A –
Cintiq21UX_Manual.fm Page 18 Friday, January 28, 2005 6:49 PM
