Unpacking your Cintiq
Page 12
Removing Cintiq from the display stand
To remove Cintiq from the display stand:
•
If the rotation lock screws are attached, remove them from the back of Cintiq.
•
Position the interactive pen display to landscape orientation before removing it from the display
stand. The stand will not release unless Cintiq is in landscape orientation.
•
Next, raise the stand incline to the highest position. See
Adjusting the display incline
on page 10
for instructions.
•
Firmly grasp the interactive pen display on both the left and right sides of the body, and lift the unit
out of the display stand.
Important:
When removing Cintiq from the display stand, always lift Cintiq in a direction
parallel to the front of the stand. You may also need to rotate Cintiq slightly so the stand will
release.
Note:
When packing Cintiq for transport, first adjust the stand to its lowest position and place the
foam packing block under the right incline adjustment lever before removing Cintiq from the stand.
The foam block will keep the stand from snapping shut while in its packaging. Always pack Cintiq
and its stand in their original containers and protective cushions. Never pack Cintiq while it is
mounted on the stand; this may damage the unit or stand during transportation.
Cintiq21UX_Manual.fm Page 12 Friday, January 28, 2005 6:49 PM
